CHOICE OF RESIN

[Guest]

I RECENTLY PURCHASED A 1976 DSII THAT HAS A CRACK IN THE HULL, ABOUT 3 FEET LONG AND UNDER THE STARBOARD SEATS. CAN ANYONE GIVE ME ADVICE ON THE TYPE OF RESIN TO USE FOR THIS REPAIR, POLYESTER VERSUS EPOXY? I INTEND TO MAKE THE REPAIR TO THE INTERIOR AND EXTERIOR OF THE HULL.
THANKS,
Jim Keeley

JIM KEELEY (jkeeley1-at-aol.com)

[Guest]

I would choose Epoxy resin for this fix...it's stronger.

Don Trop (trop-at-uswest.net)