Ive loaded 3 photos of the mast/heel joint on my DS3. This is how it was when I bought it. Obviously someone did a repair job. I'm just worried that it was not a very good one.
The mast does not sit squarely on the heel, you may be able to tell some gaps. The nuts that hold the plate in place need to be tightend a little (the plate is bent a little, somewhat from the bolts being overtightend I think - not by me). Just wondering its safe to sail with it like this or if I need to redo the repair. If so how I should go about it. It looks like original bolts/rivets were removed and new bolts screws inserted in new holes.
Photo links are: