by Leob1 » Mon May 20, 2019 6:31 pm
These are great! Answers to questions I didn't know I needed to ask!
I read the DS2 Centerboard leak article, because my CB trunks leaks, And its difficult to get the CB up and down, so I figured I'd kill two birds with one stone. Take the CB out, fix the leaks as described, replace the up and down haul, and give every thing a really good cleaning. I got the CB out with no problems. I just happen to have a 1/2 npt tap.
My question is how do you get the tang on the end of the uphaul cable through the 1/2 inch pipe fitting. The tang is almost 3/4 wide.
If anybody has done this and can let me know how you overcame this, I be eternally grateful.
Thanks and fair wind.