hello all,
my stemhead fitting has three holes fore to aft. first two are smaller than the third, which is aftmost. I use the larger one to secure the jib tack and the one nearest the bow for the forestay. The middle one is not used. What is its purpose? Am I doing something wrong?
dumb question
Moderator: GreenLake
4 posts
• Page 1 of 1
dumb question
by navahoIII » Wed Jun 24, 2009 7:35 pm
- navahoIII
- Posts: 219
- Joined: Mon Sep 24, 2007 9:43 am
by GreenLake » Wed Jun 24, 2009 10:40 pm
I had the same question when I got my boat, and did the same thing you describe. I haven't thought about it much since, but in all those years I've not observed anything detrimental from that choice.
Count me a among the curious to learn whether there's an "official" right thing to do.
Count me a among the curious to learn whether there's an "official" right thing to do.
~ green ~ lake ~ ~
- GreenLake
- Posts: 7150
- Joined: Mon Jun 18, 2007 3:54 am
by FF26 Truck » Wed Jun 24, 2009 11:18 pm
It could be to secure the tack of an asymmetrical spinnaker. Not using a spin pole makes tacks and jibes easier.
- FF26 Truck
- Posts: 12
- Joined: Fri May 29, 2009 9:15 pm
- Location: Easton, Maryland
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 49 guests