Core material

Topics primarily or specifically about the DS1. Many topics are of general interest, so please use forum sections on Rigging, Sails, etc. where appropriate.

Moderator: GreenLake

Core material

Postby Relentless » Fri Mar 01, 2019 2:13 pm

End grain balsa core was good. Pretty good for 1969 boat
Attachments
B04E0EA6-550F-443E-97B7-11165C86F767.jpeg
Core material good
B04E0EA6-550F-443E-97B7-11165C86F767.jpeg (207.26 KiB) Viewed 3821 times
Relentless
 
Posts: 20
Joined: Sat Dec 22, 2018 8:09 pm

Re: Core material

Postby GreenLake » Fri Mar 01, 2019 3:41 pm

Where did you locate this?
It's a bit hard to tell from your photo.
~ green ~ lake ~ ~
GreenLake
 
Posts: 7135
Joined: Mon Jun 18, 2007 3:54 am

Re: Core material

Postby Relentless » Sat Mar 02, 2019 11:04 am

I cut 2 holes like this on the floor of the boat.
The starboard and port Side
One between the rear of the center board trunk and the stern and one at the front of the center board.
I will load some more pics
Relentless
 
Posts: 20
Joined: Sat Dec 22, 2018 8:09 pm

Re: Core material

Postby Relentless » Sat Mar 02, 2019 11:25 am

Here is better pics
Port side is good and starboat core material gone.
I am doing so much to boat that next year I will redo both. I am prioritizing because I want to go sailing instead of working on a boat all summer. : )
Attachments
3332BC69-CBEA-40B8-9A92-5514D9E915BD.jpeg
Starboard side core material gone
3332BC69-CBEA-40B8-9A92-5514D9E915BD.jpeg (203.5 KiB) Viewed 3795 times
1D5C0328-8097-4F2E-9CEC-0A1209AB9889.jpeg
Better shot of location
1D5C0328-8097-4F2E-9CEC-0A1209AB9889.jpeg (197.46 KiB) Viewed 3795 times
Relentless
 
Posts: 20
Joined: Sat Dec 22, 2018 8:09 pm

Re: Core material

Postby GreenLake » Sat Mar 02, 2019 1:47 pm

OK, those are the stringers. Now it is possible to see.
~ green ~ lake ~ ~
GreenLake
 
Posts: 7135
Joined: Mon Jun 18, 2007 3:54 am


Return to Day Sailer I Only

Who is online

Users browsing this forum: No registered users and 11 guests