Cuddy doors for 1973 DS2 under $75

[Red Ron]

This is a summary of how I built cabin doors for Mis Gennie, my 1973 DS2. I hope it will help others build doors for there boat. Click on the link below and go to my personal gallery to see how i made them.

[phil]

is that marine plywood? Is the edge of the plywood at the top exposed to weather?

[seandwyer]

Red Ron,

Beautiful job! The finish is beautiful! Makes me wish I could have doors on my DS1, although I'm not willing to give up my easy access to below the cuddy.

Great job!

[Red Ron]

Hi Phill

It’s not marine plywood , but is protected with several coats of a good spar varnish. Only the hatch boards are made of oak plywood the other pieces are solid oak, with a light coat of varnish every spring I think it will last many years.
If the hatch boards don’t last’ It wouldn’t be hard to use them as a pattern and make a new set with a more weather resistant material.

[Red Ron]

Hi Sean
Thanks for the compliment

[Red Ron]

Hi Sean
Thanks for the compliment